Contact Us Contact Us

Service Pack for ProLiant 2018.06.0

  Software Depot
Electronic download
Frequently asked questions
Product details and specifications
Installation
Important Notes:

HPE Synergy Customers - Before installing this SPP on Synergy, please review the information at www.hpe.com/downloads/synergy.

HPE StoreOnce Customers – Installation of the SPP can cause problems on StoreOnce systems.  Please go to the HPE Support Center at https://support.hpe.com/hpesc/public/home/result?qt=storeonce to find the appropriate StoreOnce update. 

Components for the G7 and Gen8 server platforms are available in the Post-Production SPPs and can be downloaded from www.hpe.com/servers/SPP/download. For additional information, please refer to Reducing Server Updates

Note: Products sold prior to the separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. on November 1, 2015 may have a product name and model number that differ from current models.


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:
19677478aca892aceb5d2e7e4390025bSPP2018060.2018_0618.64.iso
ceb6496b3d84878cba1face4892d62e4SPP2018060.2018_0618.64.iso.md5sum
2db5cdfc84541ce60eb539dff195ba1ab503ed06fa649f78d54c3515e9a94030SPP2018060.2018_0618.64.iso.sha2sum
5c68b9132e1459bdbab0ba7f97df396959152cb6eaa5f33459609e3988a8f041SPP2018060.2018_0618.64_Components.md5
0069e6338815f2519eafdff2572ea6ede5cd64198d06b283b0d293d52649121cSPP2018060.2018_0618.64_Components.sha256

Reboot Requirement:
Reboot may be required after installation for updates to take effect and hardware stability to be maintained.
Install Instruction:

There are two methods for using the Service Pack for ProLiant to update your ProLiant servers: Online mode and Offline mode.

Online mode - Runs on a Windows or Linux hosted operating system

  • Interactive mode - Follow the onscreen steps to update firmware components
    To initiate deployment in interactive mode, run the launch_sum.bat (windows) or launch_sum.sh (Linux) script which is found in the root of the .iso image

Offline mode - Server is booted to the .iso image

  • Automatic mode - Firmware components will be updated without interaction
    Automatic mode will by default run firmware update without any user interaction after sitting 30 seconds at the menu screen when an SPP .iso image is used to boot the server.
  • Interactive mode - Follow the onscreen steps to update firmware components

Note: Booting the SPP from iLO virtual media is only supported in Automatic Firmware Update mode. Users attempting this in any other mode may experience hangs from connection timeouts, difficulties updating iLO firmware, and mouse syncing issues.

Click here for the Service Pack for ProLiant Release Notes


Installation Overview
Additional info