|
HP-UX Fibre Channel driver for Emulex-based FC HBAs
|
|
|
|
|
|
Overview |
|
|
The HP-UX FibrChanl-02 (fclp) software supports the following HPE products:
8 Gbps Fibre Channel Adapters
- AH402A (11i v3 only): PCIe Single Port 8Gb Fibre Channel Adapter.
- AH403A (11i v3 only): PCIe Dual Port 8Gb Fibre Channel Adapter.
- 456972-B21 (11i v3 only): LPe1205 PCIe Dual Port 8Gb Fibre Channel
Mezzanine Adapter.
- AT094A (11i v3 only): PCIe Dual Port 8Gb Fibre Channel 2-port 1/10GbE
Combo Adapter.
4 Gbps Fibre Channel Adapters
- AD299A (11i v2 and v3): PCIe Single Port 4Gb Fibre Channel Adapter.
- AD355A (11i v2 and v3): PCIe Dual Port 4Gb Fibre Channel Adapter.
- AD221A (11i v3 only): PCIe 4Gb Fibre Channel and 1000Base-T Ethernet
Combination Card.
- AD222A (11i v3 only): PCIe Dual Port 4Gb Fibre Channel and Dual Port
1000Base-T Ethernet.
- AD393A (11i v3 only): PCIe Dual Port 4Gb Fibre Channel and Dual Port
1000SX Ethernet.
- 403621-B21 (11i v3 only): LPe1105 PCIe Dual Port 4Gb Fibre Channel
Mezzanine Adapter.
For information about enhancements included in this driver release, see the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX 11i
Release Notes
for your bundle version.
Installation
Instructions:
- To install all the products from the downloaded
depot, run the swinstall program using the
command: swinstall.
If
you prefer to run the swinstall program from the
command line, enter /usr/sbin/swinstall -x autoreboot=true -s depot_file
\* at the command prompt. The depot_file
filename should contain the full path; for example, /tmp/fclp.depot.
- Select the "Local Directory" Source
Depot Type (from a list of: Local CD, Local tape, Local Directory, Network
Directory/CDROM).
- Enter full path name of the depot file you
downloaded into Source Depot Path field.
- Click OK button.
- Highlight FibrChanl-02 software bundle.
- Choose Mark for Install from the Actions menu to choose the product to be installed.
- Choose Install from the Actions
menu to begin product installation that will display the Install
Analysis window.
- Click the OK button in the Install
Analysis window when the Status field displays a Ready
message.
- Click the Yes button in the Confirmation
window to confirm that you want to install the software. swinstall installs product
files, and builds the kernel. Estimated time for processing: 3 to 5
minutes.
- When the Status field indicates Ready, click the Done button.
- The Note window opens. Click the OK
button on the Note window to reboot the system.
For More Information
These documents are available on the HPE website at
https://support.hpe.com/hpesc/public/home/documentHome?document_type=5000001&pmrsr=0&sort_by=date&sp4ts.oid=5039735
Support Guides are listed alphabetically in the "User Guide" section. Support Matrix documents are listed alphabetically in the "General Reference" section.
|
|
|
|
Additional product information |
|
Product #: |
FibrChanl-02 |
Additional info |
Version: |
B.11.23/11.31.1805 |
Software specification: |
HP-UX 11.31.1805 IA (FibrChanl-02_B.11.31.1805_HP-UX_B.11.31_IA.depot) HP-UX 11.31.1708 IA (FibrChanl-02_B.11.31.1708_HP-UX_B.11.31_IA.depot) HP-UX 11.31.1603 IA (FibrChanl-02_B.11.31.1603_HP-UX_B.11.31_IA.depot) HP-UX 11.23.1106 IA (FibrChanl-02_B.11.23.1106_HP-UX_B.11.23_IA.depot)
|
|
|
|
|