Contact Us Contact Us

HP-UX LunaDock2-01 USB Driver

  Software Depot
Electronic download
Frequently asked questions
Product details and specifications
Select
Overview

LunaDock2-01 is a USB driver that provides connectivity to the SafeNet Lunadock2 USB device on the HP-UX 11i v3 operating system. When the driver is installed on a system, Device Special Files (DSFs) are created for the LunaDock2 USB device available on the system. Applications can then interact with the Lunadock2 USB device through the respective /dev/luna/* DSF files.

The LunaDock2-01 USB driver is supported from the HP-UX 11i v3 March 2010 Operating Environment Update Release. The command patch PHCO_41992 must also be installed for the driver to function smoothly. PHCO_41992 creates the DSFs for the LunaDock2 USB device.

Supported Hardware Platforms

The driver is supported on the following hardware platforms:

  • rx2660
  • rx3600
  • rx6600
  • rx2800
Note:
A Maximum of 64 KB buffer space is available for the USB device. Hence an application invoking the read()/write() functions on the device must not exceed this buffer size.

Known Problem

Problem

A DSF might not be created for the LunaDock2 USB device after the device is inserted into the USB port.

Workaround

Execute the insf -e command and run ioscan.
If the problem persists, unplug the Lunadock2 USB device, plug it in again and run ioscan.

Publish Date

August 2011

 
Additional product information
Product #: LunaDock2-01
Version: 1.0
Software specification: HP-UX 11i v3 version 1.0(LunaDock2-01.depot)
Installation
Select