Contact Us Contact Us

HPE SYNERGY SOFTWARE RELEASE SETS

  Software Depot
Electronic download
Frequently asked questions
HP Inc. Software Depot
Product details and specifications
Overview

HPE SYNERGY SOFTWARE RELEASE SETS

HPE Synergy Software Release Sets are available for download

HPE Synergy Software Release Sets are available for customers to download and use on products which are under an active HPE Warranty or an HPE Support Agreement. Access to the Software Release Sets requires validation via the HPE Support Center [http://www.hpe.com/support/hpesc]. HPE Synergy Software Release Sets (shown as rows in the tables below) are available with software download links. Combinations found within a specific release set have been developed, tested, and released together.  For Composer and Image Streamer, a choice of downloads is provided: firmware updates to existing images, and complete images for recovery in the event that re-imaging of the system is needed.

 

***************************************************************************

 

WHAT'S NEW?

 

This Comparison Table is a guide to help you select the best Synergy Software Release Set 4.00.Gen10.20171215 for your use.

 

HPE Synergy Software Release Set 4.0 -- Comparison Table

HPE SYNERGY SOFWARE RELEASE SET

4.00.Gen10.20171215

4.00.Gen10.20171215B

4.00.Gen10.20171215C

4.00.Gen10.20171215D

4.00.Gen10.20171215E

 

No Suffix

Suffix 'B'

Suffix 'C'

Suffix 'D'

Suffix 'E'

KEY FIRMWARE CONTENTS

 

 

 

 

 

HPE Synergy Custom Bundle Base

2017.10.20171215

2017.10.20171206

2017.10.20171108

2017.07.20170920

2017.07.20170721

HPE Synergy Custom Bundle - Core SPP Date

October-17

October-17

October-17

July-17

July-17

HPE VC 40Gb F8 Module Firmware

1.2.0.1005

1.1.1.1003

1.1.1.1003

1.1.0.1010

1.1.0.1010

Frame Link Module Firmware

2.01.01

2.01.01

2.01.01

2.01.01

2.00

 

 

 

 

 

 

HPE SYNERGY COMPOSER - KEY FEATURE SUPPORT

4.00.05

4.00.05

4.00.05

4.00.05

4.00.05

Security

 

 

 

 

 

Scope Based Access Control (SBAC)

X

X

X

X

X

Certificate Management

X

X

X

X

X

SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

X

X

X

X

X

2-Factor authentication (CAC/PIV)

X

X

X

X

X

Remote Support

 

 

 

 

 

Synergy Interconnect Module (ICM) Support

X

X

X

X

X

Synergy Storage

 

 

 

 

 

Drive sanitize for HPE Synergy D3940 Storage Modules

X

X

X

Not Supported

Not Supported

Firmware Management

 

 

 

 

 

Non-disruptive firmware updates extended to cover data path firmware updates

X

Not Supported

Not Supported

Not Supported

Not Supported

Synergy Fabric

 

 

 

 

 

LACP on s-channels/downlinks

X

Not Supported

Not Supported

Not Supported

Not Supported

Mixed-speed Master/Satellite Interconnect Modules (ICMs)

X

Not Supported

Not Supported

Not Supported

Not Supported

SmartLink and non-Redundant configurations

X

Not Supported

Not Supported

Not Supported

Not Supported

Pause flood protection and Storm control

X

Not Supported

Not Supported

Not Supported

Not Supported

Private Network support

X

Not Supported

Not Supported

Not Supported

Not Supported

Increase VLAN scale for network sets

X

Not Supported

Not Supported

Not Supported

Not Supported

Connections without an assigned network

X

Not Supported

Not Supported

Not Supported

Not Supported

16Gb VC-FC Interconnect Module (ICM) port trunking

X

Not Supported

Not Supported

Not Supported

Not Supported

 

 

 

 

 

 

HPE SYNERGY IMAGE STREAMER - KEY FEATURE SUPPORT

4.00.02

4.00.02

4.00.02

4.00.02

4.00.02

Activate Synergy fluid resource pools by workload swapping

X

X

X

X

X

Ease of Use

 

 

 

 

 

Changing Server Profile OS Deployment Plan preserves settings common to both plans

X

X

X

X

X

View the OS volume and artifact storage in the UI

X

X

X

X

X

Security

 

 

 

 

 

Scope Based Access Control (SBAC) extended to Image Streamer OS Deployment Plans

X

X

X

X

X

 

NOTE: See more detailed information on Synergy Software Release Sets at the bottom of this webpage. To access instructions on deploying Release Sets please see HPE Synergy Firmware Update Overview.

 

***************************************************************************


SYNERGY SW RELEASE SETS -- for 4.00 Release Sets

 

Synergy

Software

Release Set

Synergy

Custom SPP bundle

Update Images

Switches

(not managed by Composer)

Recovery Images (complete images)

Composer

Firmware

Image Streamer

Firmware

Composer

Firmware

Image Streamer

Firmware

4.00.Gen10.20171215 (Gen10 & Gen9)

NEW

2017.10.20171215

4.00.05

4.00.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

4.00.05

4.00.02

4.00.Gen10.20171215B (Gen10 & Gen9)

NEW

2017.10.20171206

4.00.05

4.00.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

4.00.05

4.00.02

4.00.Gen10.20171215C

(Gen10 & Gen9)

NEW

2017.10.20171108

4.00.05

4.00.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

4.00.05

4.00.02

4.00.Gen10.20171215D (Gen10 & Gen9)

NEW

2017.07.20170920

2017.07.20170721WD (Smart Array Windows driver only)

4.00.05

4.00.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

4.00.05

4.00.02

4.00.Gen10.20171215E (Gen10 & Gen9)

NEW

2017.07.20170721

2017.07.20170721WD (Smart Array Windows driver only)

4.00.05

4.00.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

4.00.05

4.00.02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

NOTE: The Synergy Custom SPP bundle is delivered as a custom download.

 

***************************************************************************

 

 

SYNERGY SW RELEASE SETS -- for 3.10 Release Sets

NOTE: If you have Image Streamer in your setup and wish to upgrade your environment, please contact HPE Support so that they can review your setup and provide assistance with the upgrade if required.

Synergy

Software

Release Set

Synergy

Custom SPP bundle

Update Images

Switches

(not managed by Composer)

Recovery Images (complete images)

Composer

Firmware

Image Streamer

Firmware

Composer

Firmware

Image Streamer

Firmware

3.10.Gen10.20171206 (Gen10 & Gen9)

2017.10.20171206

3.10.07

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.07

3.10.02

3.10.Gen10.20171108 (Gen10 & Gen9)

2017.10.20171108

3.10.07

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.07

3.10.02

3.10.Gen10.20170920

(Gen10 & Gen9)

2017.07.20170920

2017.07.20170721WD (Smart Array Windows driver only)

3.10.07

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.07

3.10.02

3.10.Gen10.20170721

(Gen10 & Gen9)

2017.07.20170721

2017.07.20170721WD (Smart Array Windows driver only)

Update to 3.10.07 in above Release Set

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.04

3.10.02

3.10.20171006

(Gen9 ONLY)

2017.04.20171006 (3.10) 2017.07.20170721WD (Smart Array Windows driver only)

3.10.07

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.07

3.10.02

3.10.20170713

(Gen9 ONLY)

2017.04.20170512 2017.07.20170721WD (Smart Array Windows driver only)

Update to 3.10.07 in above Release Set

3.10.02

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.10.04

3.10.02


NOTE: The Synergy Custom SPP bundle is delivered as a custom download.

NOTE: Synergy Software Release Set 3.10.20171006 is the last 3.10-based release set that will provide hot fixes based on Gen9-based SPP bundles (e.g. Custom SPP bundles 2017.04.2017xxxx).

  • Prepare to move from release sets using Gen9-based Custom SPP bundles to release sets using Gen10-based Custom SPP bundles (e.g. Release Set 3.10.Gen10.2017xxxx).
  • If you already require support for Gen10 compute modules, then you must use a Release Set 3.10.Gen10.2017xxxx.

 

***************************************************************************

 

SYNERGY SW RELEASE SETS -- for 3.00 Release Sets

NOTE: All 3.00 Release Sets have Image Streamer restrictions

Synergy

Software

Release Set

Synergy

Custom SPP bundle

Updates

Switches

(not managed by Composer)

Recovery (Complete Images)

Composer

Firmware

Image Streamer

Firmware

Composer

Firmware

Image Streamer

Firmware

3.00.20171006

(Gen9 ONLY)

2017.04.20171006 (3.00) 2017.07.20170721WD (Smart Array Windows driver only)

3.00.08

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.08

3.00.05

3.00.20170713

(Gen9 ONLY)

2017.04.20170512 2017.07.20170721WD (Smart Array Windows driver only)

3.00.08

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.08

3.00.05

3.00.20170712

(Gen9 ONLY)

2017.04.20170417

3.00.08

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.08

3.00.05

3.00.20170512

(Gen9 ONLY)

2017.04.20170512

3.00.07

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.07

3.00.05

3.00.20170417

(Gen9 ONLY)

2017.04.20170417

3.00.07

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.07

3.00.05

3.00.20170323

(Gen9 ONLY)

2016.10.20170105

3.00.07

3.00.05

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.07

3.00.05

3.00.20170105

(Gen9 ONLY)

2016.10.20170105

3.00.05

Not available

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.05

Not available

3.00.20170103

(Gen9 ONLY)

2016.10.20170103

3.00.05

Not available

HPE Synergy 40Gb F8 Switch Module

Brocade 16Gb/12 FC Switch for Synergy

Brocade 16Gb/24 FC Switch for Synergy

Brocade 16Gb FC PwrPk+ Mod for Synergy

3.00.05

Not available


   NOTE: The Synergy Custom SPP bundle is delivered as a custom download.

 

***************************************************************************

 

REFERENCE INFORMATION

The following references may help you understand more about HPE processes.

 

***************************************************************************

 

DOWNLOAD LINKS for 4.00 Release Sets

NOTE: Extensive version information on specific components is available on the linked 'Download' webpages for individual Synergy Software Release Sets.

Download Instructions (requires HPE Warranty or HPE Support Agreement)

1.    Log into your HPE Passport account (one-time).

2.    Link your HPE warranty or HPE support agreement to your HPE Passport account, if you have not already done so.

NOTE: You only have to perform this linking process once. In future downloads, the HPE Support Center will recognize your entitlement as long as your product has an active HPE Warranty or HPE Support Agreement.

3.    Select the Synergy Software Release Set of your choice from the matrix above.

 

Release Set 4.00.Gen10.20171215 (No Suffix)

 

What's New

  • HPE Composer Bundle 4.00.05 features:

o   Security

o   Scope Based Access Control (SBAC)

o   Certificate Management

o   SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

o   2-factor authentication (CAC/PIV)

o   Synergy Storage enables drive sanitizing for HPE Synergy D3940 Storage Module connected drives

o   Firmware Management extends Non-disruptive firmware updates to cover data path firmware updates

o   Remote Support and Supportability for Synergy Interconnect Modules (ICMs)

o   Synergy Fabric

o   LACP on s-channels/downlinks

o   Mixed-speed Master/Satellite Interconnect Modules (ICMs)

o   SmartLink and non-Redundant configurations

o   Pause flood protection and Storm control

o   Private Network support

o   Increase VLAN scale for network sets

o   Connections without an assigned network

o   16Gb VC-FC Interconnect Module (ICM) port trunking

  • HPE Image Streamer 4.00.02 features:

o   Activate Synergy fluid resource pools by enabling workload swapping

o   Ease of Use Improvements

o   Changing Server Profile OS Deployment Plan preserves settings common to both plans

o   View the OS volume and artifact storage in the UI

o   Security extends Scope Based Access Control (SBAC) to Image Streamer OS Deployment Plans

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 4.00.05
  • HPE Synergy Image Streamer, firmware version 4.00.02
  • HPE Synergy Custom SPP bundle, version 2017.10.20171215
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.2.0.1005

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 4.00.Gen10.20171215

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 4.00.Gen10.20171215B (Suffix 'B')

 

What's New

  • HPE Composer Bundle 4.00.05 features:

o   Security

o   Scope Based Access Control (SBAC)

o   Certificate Management

o   SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

o   2-factor authentication (CAC/PIV)

o   Synergy Storage enables drive sanitizing for HPE Synergy D3940 Storage Module connected drives

o   Remote Support and Supportability for Synergy Interconnect Modules (ICMs)

  • HPE Image Streamer 4.00.02 features:

o   Activate Synergy fluid resource pools by enabling workload swapping

o   Ease of Use Improvements

o   Changing Server Profile OS Deployment Plan preserves settings common to both plans

o   View the OS volume and artifact storage in the UI

o   Security extends Scope Based Access Control (SBAC) to Image Streamer OS Deployment Plans

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 4.00.05
  • HPE Synergy Image Streamer, firmware version 4.00.02
  • HPE Synergy Custom SPP bundle, version 2017.10.20171206
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.1.1003

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 4.00.Gen10.20171215B

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 4.00.Gen10.20171215C (Suffix 'C')

 

What's New

  • HPE Composer Bundle 4.00.05 features:

o   Security

o   Scope Based Access Control (SBAC)

o   Certificate Management

o   SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

o   2-factor authentication (CAC/PIV)

o   Synergy Storage enables drive sanitizing for HPE Synergy D3940 Storage Module connected drives

o   Remote Support and Supportability for Synergy Interconnect Modules (ICMs)

  • HPE Image Streamer 4.00.02 features:

o   Activate Synergy fluid resource pools by enabling workload swapping

o   Ease of Use Improvements

o   Changing Server Profile OS Deployment Plan preserves settings common to both plans

o   View the OS volume and artifact storage in the UI

o   Security extends Scope Based Access Control (SBAC) to Image Streamer OS Deployment Plans

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 4.00.05
  • HPE Synergy Image Streamer, firmware version 4.00.02
  • HPE Synergy Custom SPP bundle, version 2017.10.20171108
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.1.1003

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 4.00.Gen10.20171215C

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 4.00.Gen10.20171215D (Suffix 'D')

 

What's New

  • HPE Composer Bundle 4.00.05 features:

o   Security

o   Scope Based Access Control (SBAC)

o   Certificate Management

o   SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

o   2-factor authentication (CAC/PIV)

o   Synergy Storage enables drive sanitizing for HPE Synergy D3940 Storage Module connected drives

o   Remote Support and Supportability for Synergy Interconnect Modules (ICMs)

  • HPE Image Streamer 4.00.02 features:

o   Activate Synergy fluid resource pools by enabling workload swapping

o   Ease of Use Improvements

o   Changing Server Profile OS Deployment Plan preserves settings common to both plans

o   View the OS volume and artifact storage in the UI

o   Security extends Scope Based Access Control (SBAC) to Image Streamer OS Deployment Plans

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 4.00.05
  • HPE Synergy Image Streamer, firmware version 4.00.02
  • HPE Synergy Custom SPP bundle, version 2017.07.20170920
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.0.1010

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 4.00.Gen10.20171215D

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 4.00.Gen10.20171215E (Suffix 'E')

 

What's New

  • HPE Composer Bundle 4.00.05 features:

o   Security

o   Scope Based Access Control (SBAC)

o   Certificate Management

o   SNMPv3 support for health monitoring of server hardware and trap forwarding of server hardware traps

o   2-factor authentication (CAC/PIV)

o   Synergy Storage enables drive sanitizing for HPE Synergy D3940 Storage Module connected drives

o   Remote Support and Supportability for Synergy Interconnect Modules (ICMs)

  • HPE Image Streamer 4.00.02 features:

o   Activate Synergy fluid resource pools by enabling workload swapping

o   Ease of Use Improvements

o   Changing Server Profile OS Deployment Plan preserves settings common to both plans

o   View the OS volume and artifact storage in the UI

o   Security extends Scope Based Access Control (SBAC) to Image Streamer OS Deployment Plans

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 4.00.05
  • HPE Synergy Image Streamer, firmware version 4.00.02
  • HPE Synergy Custom SPP bundle, version 2017.07.20170721
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.0.1010

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 4.00.Gen10.20171215E

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

***************************************************************************

 

DOWNLOAD LINKS for 3.10 Release Sets

NOTE: Extensive version information on specific components is available on the linked 'Download' webpages for individual Synergy Software Release Sets.

Download Instructions (requires HPE Warranty or HPE Support Agreement)

1.    Log into your HPE Passport account (one-time).

2.    Link your HPE warranty or HPE support agreement to your HPE Passport account, if you have not already done so.

NOTE: You only have to perform this linking process once. In future downloads, the HPE Support Center will recognize your entitlement as long as your product has an active HPE Warranty or HPE Support Agreement.

3.    Select the Synergy Software Release Set of your choice from the matrix above.

 

Release Set 3.10.Gen10.20171206

 

What's New

  • ROM updates:

o   I37 - HPE Synergy 480 Gen9 Compute Module

o   I39 - HPE Synergy 660 Gen9 Compute Module

o   I42 - HPE Synergy 480 Gen10 Compute Module

o   I43 - HPE Synergy 660 Gen10 Compute Module

o   Carried from 3.10.Gen10.20171108

o   Carried from 3.10.Gen10.20171108

o    

  • HPE Synergy Custom SPP Bundle 2017.10.20171206 (based on 2017.10.20171108) with:

o   ROM updates

o   Additional hotfixes (carried from 3.10.Gen10.20171108)

o   3820C/2820C FW and driver update

o   Smart Array Driver Update

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.07
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.10.20171206
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.1.1003

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 3.10.Gen10.20171206

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.10.Gen10.20171108

 

What's New

    • Additional hotfixes:
      • 3820C/2820C FW and driver update
      • Smart Array Driver Update
      • HDD drive FW update

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.07
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.10.20171108
  • Switches (not managed by HPE Synergy Composer):

o   HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.1.1003

o   Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 3.10.Gen10.20171108

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.10.Gen10.20170920

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView 3.10.07 urgent update for better FW update experience
  • HPE Synergy Custom SPP Bundle, Version 2017.07.20170920 (based on SPP 2017.10.1)
    • Toshiba SAS 512E Hot Fix (HPD8)
    • iLO Hot Fixes (version 2.55)
    • FLM Hot Fix against new version FLM (version 2.01.01)

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.07
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.07.20170920
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.0.1010
    • Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 3.10.Gen10.20170920

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.10.Gen10.20170721

 

What's New

  • Minimum Required Release Set for Gen10 compute modules in Synergy configuration
  • HPE Synergy Composer Bundle, HPE OneView Version 3.10.04
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.1002
  • HPE Synergy Custom SPP Bundle, Version 2017.07.20170721 (based on SPP 2017.07.1)
  • HPE Synergy Custom SPP Bundle, Version 2017.07.20170721WD (See Release Notes for SPP contents and download instructions for this bundle, which contains the Smart Array Windows driver only)

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.04
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.07.20170721
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.1.0.1010
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0b
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0b
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0b

 

Download at: 3.10.Gen10.20170721

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.10.20171006

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView 3.10.07 update
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20171006 (based on SPP 2016.10.1)
    • Toshiba SAS 512E Hot Fix (HPD8)
    • iLO Hot Fixes (version 2.55)

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.07
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.04.20171006 (3.10)
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 3.10.20171006

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.10.20170713

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView Version 3.10.04
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.10.02
  • HPE Synergy Custom SPP Bundle 2017.04.20170512

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.10.04
  • HPE Synergy Image Streamer, firmware version 3.10.02
  • HPE Synergy Custom SPP bundle, version 2017.04.20170512
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0a

 

Download at: 3.10.20170713

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

*********************************************************************************************************************

 

DOWNLOAD LINKS for 3.00 Release Sets

NOTE: Extensive version information on specific components is available on the linked 'Download' webpages for individual Synergy Software Release Sets.

Download Instructions (requires HPE Warranty or HPE Support Agreement)

1.    Log into your HPE Passport account (one-time).

2.    Link your HPE warranty or HPE support agreement to your HPE Passport account, if you have not already done so.

NOTE: You only have to perform this linking process once. In future downloads, the HPE Support Center will recognize your entitlement as long as your product has an active HPE Warranty or HPE Support Agreement.

3.    Select the Synergy Software Release Set of your choice from the matrix above.

 

Release Set 3.00.20171006

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView 3.00.08
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20171006 (based on SPP 2016.10.1)
    • Toshiba SAS 512E Hot Fix (HPD8)
    • iLO Hot Fixes (version 2.55)

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.08
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2017.04.20171006 (3.00)
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade FC Switches - See the "B-Series FC Switch Connectivity stream" on the HPE SPOCK site for the supported switches and FOS versions.

 

Download at: 3.00.20171006

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.00.20170713

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView Version 3.00.08
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.00.05
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20170512 (See Release Notes for SPP contents)
  • HPE Synergy Custom SPP Bundle (Smart Array Windows Driver), Version 2017.07.20170721WD

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.08
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2017.04.20170512
  • HPE Synergy Custom SPP bundle (Smart Array Windows Driver), version 2017.07.20170721WD
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0a

 

Download at: 3.00.20170713

  • NOTE: See HPE Support Center for installation instructions for Synergy SPP 2017.07.20170721WD (Windows Driver for the Smart Array controller only).

 

Release Set 3.00.20170712

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView Version 3.00.08
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.00.05
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20170417 (based on SPP 2016.10.1)

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.08
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2017.04.20170417
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0a

 

Download at: 3.10.20170713

 

Release Set 3.00.20170512

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView Version 3.00.07
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.00.05
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20170512 (based on SPP 2017.04.1)
    • iLO 5 version 2.53 -- Hot fixes for NAND and other enhancements
    • HPE Smart Array P542D Controller FW -- Hot fixes and enhancements

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.07
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2017.04.20170512
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0a

 

Download at: 3.10.20170713

 

Release Set 3.00.20170417

 

What's New

  • Minimum release set for 3.00.0x Synergy Configurations
  • HPE Synergy Composer Bundle, HPE OneView Version 3.00.07
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.00.05
  • HPE Synergy Custom SPP Bundle, Version 2017.04.20170417 (based on SPP 2016.10.1)
    • HPE VC SE 40Gb F8 Module FW 1.2.0 -- Hot fixes and enhancements
    • HPE Synergy 12Gb SAS Connection Module FW 1.0.22.0 -- Hot fixes and enhancements

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.07
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2017.04.20170417
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.2.1006
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.1.0a
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.1.0a

 

Download at: 3.10.20170713

 

Release Set 3.00.20170323

 

What's New

  • HPE Synergy Composer Bundle, HPE OneView Version 3.00.07
  • HPE Synergy Image Streamer Bundle, Image Streamer Version 3.00.05 (initial release)
  • HPE Synergy Custom SPP Bundle 2016.10.20170105

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.07
  • HPE Synergy Image Streamer, firmware version 3.00.05
  • HPE Synergy Custom SPP bundle, version 2016.10.20170105
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.1.1004
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.0.1b

 

Download at: 3.10.20170713

 

Release Set 3.00.20170105

 

What's New

  • HPE Synergy Custom SPP Bundle 2016.10.20170105

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.05
  • HPE Synergy Image Streamer - not available
  • HPE Synergy Custom SPP bundle, version 2016.10.20170105
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.1.1004
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.0.1b

 

Download at: 3.10.20170713

 

Release Set 3.00.20170103 - Initial Synergy release

 

What's New

  • HPE Synergy Composer 3.00.05 (initial release)
  • HPE Synergy Custom SPP Bundle 2016.10.20170103

 

Major Components and Versions

  • HPE Synergy Composer, firmware version 3.00.05
  • HPE Synergy Image Streamer - not available
  • HPE Synergy Custom SPP bundle, version 2016.10.20170103
  • Switches (not managed by HPE Synergy Composer):
    • HPE Synergy 40Gb F8 Switch Module, firmware version 1.0.1.1004
    • Brocade 16Gb/12 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb/24 FC Switch for Synergy, firmware version: FOS 8.0.1b
    • Brocade 16Gb FC PwrPk+ Mod for Synergy, firmware version: FOS 8.0.1b

 

Download at: 3.10.20170713

 

 
Additional product information
Product #: synergy_rs_00.00
Version: -
Software specification: